Oriol

Oriol LED Die
(OG450, OG460, OG470-xxx)

Mechanical Specifications
Die Dimension	Die Thickness	P-bonding Pad (square)		N-bonding Pad (round)
		Diameter	Thickness	Diameter	Thickness
350 x 350 µm	100 µm	90 µm	1.0 µm	90	1.0

Electrical / Optical Characteristics
	Minimum	Typical	Maximum	Unit	Condition
Forward Voltage	3.0	3.3	4.0	V	@ 20 mA
Radiant Flux	TBD	12		mW	@ 20 mA
Reverse Current			50.0	µA	@ 5 V
Peak Wavelength		444			@ 20 mA
		456			@ 20 mA
		472			@ 20 mA
Dominant Wavelength OG450-xxx	445	450	455	nm	@ 20 mA
OG460-xxx	455	460	465		@ 20 mA
OG470-xxx	465	470	475		@ 20 mA
Halfwitdh		30		nm	@ 20 mA

Part Number
Intensity	100-120 mcd	80-120 mcd	60-120 mcd	30-120 mcd
Wavelength
450 nm			OG450-UBD	OG450-SBD
460 nm		OG460-UBD	OG460-SBD	OG460-NBD
470 nm	OG470-UBD	OG470-SBD	OG470-NBD

Notes:
1. Luminous Intensity is measured on Oriol die prober (for relative correlation only)
2. Tolerance of above values is 10% except dominant wavelength
3. Dice are delivered on blue tape
4. Bond pads are Au
5. Radiant Flux is based on projected efficiency of encapsulated device
6. This is a preliminary datasheet (rev.a 2/7/02)